Nothing invokes cheery holiday spirit better than a brilliant light display, inside and out. On the other hand, nothing brings winter revelry to an abrupt halt like the power suddenly going off in a room, causing the lights, music and other electric-powered accessories to unexpectedly wink out.
Why Your Circuits Get Overloaded During the Holidays
If you suddenly lose power in a single room or area of your house, chances are you overloaded a circuit by attempting to draw too much power from it and caused the breaker to trip. Loading up too many lights or devices on a single power strip is a common culprit. Connecting too many strings of lights together can also cause an issue if they all lead to the same outlet, especially if you live in an older home which wasn’t wired to modern standards.
You put your circuits at a double risk if you are cooking a big meal and preparing for a large family gathering at the same time you deck out your halls with seasonal illumination on the same circuit. Think about adding power for whirling mixers, food processors, coffee makers, and dishwashers to your poor overloaded wiring.
Tidying up before and after having company over can also pose a danger to your electric system – vacuum cleaners are notorious for tripping breakers on circuits that are already carrying a decent-sized load. Space heaters are another known electricity hog that often pose problems to circuits during the cold holiday months.
How to Prevent Circuit OverloadAvoiding an outage is simple in theory – don’t plug too much stuff into the same circuit. Typically, each room in the house has its own circuit, with heavy-duty items like an electric oven or dryer requiring their own dedicated line, although exact schematics can vary.
1. Calculate your circuit loadMost circuits are rated for between 15 and 20 amps, so if you get a figure for how much current your lights and appliances draw you can ballpark how much is safe to plug in. If you approach an 80 percent load, find another room to plug in the next light strand.
2. Be careful with large appliancesIt’s a good idea to avoid rooms that already have a lot of appliances, like the kitchen, when looking for a spot to plug in your lights. You can also unplug any devices or electronics that you don’t plan to use, to free up more current for those precious decorations.
3. Invest in LEDsOne way to get a lot more festive with your existing system is to purchase LED lights, which draw much less current than traditional bulbs and will save you money on your electricity bill during the holidays in addition to putting less of a strain on your wiring.
4. Install more circuits
If you are truly committed to having the brightest holiday display on the block, complete with animatronic snowmen and the like, you could even consider installing one or more new, dedicated circuits rated for 20 amps.
How to Fix an Overloaded Circuit
In the event you do trip a breaker, you should feel grateful that it was on guard to protect you. If the breaker wasn’t there when the current got to be too much, the wiring in the circuit could quickly heat up, melt the insulation and potentially start a fire.
When the light suddenly does go out in a room, the first thing to do is unplug any appliances or devices on the affected circuit. If you don’t know which outlets correspond exactly to which circuit, now is a good time to figure it out – just look for the stuff that stopped working!
Next, open your circuit box and find the tripped breaker. The switches typically have an on/ off label, but if not, just look for the breaker flipped in the opposite direction of all the others. To restore power to the circuit, first switch the breaker all the way off – when it trips, it only flips partway, and can’t restore power until you turn it off completely – then switch it back to the on position. Once you get the electricity up and running again, take your lesson about overloading the circuit to heart and don’t try to run as many things at once next time.
A final word of caution: It’s possible that your breaker may not trip right away on a lightly overloaded circuit, especially if you live in an older house. Keep an eye out for buzzing, sparks, or warmth coming from a heavily-used outlet, or persistent dimming of lights. If you spot any of those signs, stop using that outlet immediately until you can get an electrician to take a look and remedy any hazardous conditions. Remember, no holiday display is worth risking your home or family to a fire.